| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Desperately in need of ----------- http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=1227 |
Page 1 of 1 |
| Author: | LanceK [ Sat Mar 05, 2005 5:19 am ] |
| Post subject: | |
A flamed koa side that I can cut custom bindings from, lets just say, my bit was a tad too deep. Side purflings are out of the question, so a binding that is .040 taller than what I have is what I need 
Anybody have a few orphan sides? I can send a sample of what I have for matching purposes, the end graph is already glued in, not that I cant cut it out, but id rather not if possible. Let me know Thanks -All Lance |
|
| Author: | Sprockett [ Sat Mar 05, 2005 5:48 am ] |
| Post subject: | |
What are the measurements you need??, I have a couple of sets from Pegasus and they are usually a little taller than I need... let me know... -Paul- |
|
| Author: | LanceK [ Sat Mar 05, 2005 6:00 am ] |
| Post subject: | |
4 strips .320 tall if you got them Paul, get ready for a BIG fat KISS! |
|
| Author: | Sprockett [ Sat Mar 05, 2005 6:05 am ] |
| Post subject: | |
I'm in the office this morning but I'll check as soon as I get home, I have a couple of stacks of them... -Paul- |
|
| Author: | LanceK [ Sat Mar 05, 2005 6:08 am ] |
| Post subject: | |
Great! Thanks Paul --- ill be anxiously awaiting 
|
|
| Author: | Sprockett [ Sat Mar 05, 2005 6:38 am ] |
| Post subject: | |
Well I also have some strips from the Koa sides I just bent and we might be able to use those, but again I'll need to check... Big launch day at work so I'll be here a while 
Cheers -Paul- |
|
| Author: | LanceK [ Sat Mar 05, 2005 1:13 pm ] |
| Post subject: | |
Dooo doooo -- doooo dooooood ---- doooo 
|
|
| Author: | Sprockett [ Sat Mar 05, 2005 2:34 pm ] |
| Post subject: | |
sorry I'm still at work, we hit an issue with a server we are working out.... it's been a long long day... -Paul- |
|
| Author: | LanceK [ Sat Mar 05, 2005 3:01 pm ] |
| Post subject: | |
no prob Paul, -- time for bed any way 
|
|
| Author: | Sprockett [ Sat Mar 05, 2005 4:42 pm ] |
| Post subject: | |
OK here is what I have.... The strips are .283 by about .090 so that's not good enough... But I do have 2 cutoffs from a Koa guitar that are .093 thick and 1.280 wide at one end and about .544 at the other. I can try to cut them down into strips for you if you want and see if I can get 4 decent length pieces (I would at least get two of decent length) and send those to you. Let me know if you want me to try for you, it's this or you can call bob at Pegasus and he can make you some at that height... Let me know.. -Paul- |
|
| Author: | tippie53 [ Sun Mar 06, 2005 8:14 am ] |
| Post subject: | |
Call me I think I can help you out John Hall |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|